In the majority of cases, most people spend quite a lot of money purchasing their forklift. Hence, it is very important to take proper care of it in order to protect your investment well into the long run. It is a great idea to know the procedures which are carried out during taking care of and maintaining this machine.
By starting up the forklift and listening closely how it works is amongst the best ways to tell how good the engine is working. Like for example, if there are any knocks or misses, the equipment is defective and this must raise several concerns. Also listen closely for any squealing noise which come from the belts since these noises will provide you with a lot of information.
When performing maintenance, several of the main parts you would need to pay attention to include the horn, safety warning devices, the overhead guard, the lights and the gauges. Any faulty components or burnt out light bulbs should be replaced as soon as they are noticed. It is also essential to inspect the wiring.
The battery compartment terminals should be cleaned after the above parts have been inspected thoroughly. If the terminals are not clean, be sure to clean them well. Each and every battery cell should be inspected in order to make sure that the fill level is topped up to the regulated amount.
An oil change is the next step to drain all the oil out of the machinery and then change the filters. The hydraulic filter, the transmission filter and the fuel filters must be regularly replaced. Prior to fitting them, be sure to write the date on the new filters by utilizing a permanent marker to be able to keep track.
Once the oil change has been done and new filters have been fitted, visually inspect the drive axle from underneath the machine. Be certain to grease the axle if there is any grease fitting. Inspect the engine belts for any frays or cracks. If you find any, fix the problem accordingly. Next, inspect every other component of the machinery including the wheels. If any kind of fault or problem is detected, be sure to deal with it immediately in order to make sure the equipment is running at its safest and optimum levels.